SONIQ QPD500B - Manual (Page 2)

Audio Setup Page
The setting structure is:
Select Audio setup in the Setup Menu and then Select the Speaker Setup Menu using the
Navigation (
, ) buttons to navigate through the menus/screens and press the ENTER button to
confirm. The setting structure is as follow: - - Speaker Setup Page - -
Downmix LT/RT
Stereo
Off
Front Speaker Large
Small
Center Speaker Large
Small
Off
Rear Speaker Large
Small
Off
Subwoofer On
Off
Test Tone On
Off
Downmix
LT/RT: The front speakers are in theatrical LT/RT downmix mode.
Stereo: The front speakers are in Stereo Downmix mode.
Off: The downmix mode is off.
Channel Delay
Select Speaker Setup Page in the Setup Menu and then select the Channel Delay Menu using
the Navigation (
, ) buttons to navigate through the menus/screens and press the Navigation
( ) button to enter the content of this menu.
The screen shows:
Technical Data
Power Requirements: AC 110-240V ~ 60/50Hz
Power Consumption: 15W
Signal System: NTSC / PAL
Weight: 1.7 Kg (main unit)
Dimensions: 430 (L) x 218 (W) x 43 (H)mm
Operating Temperature Range: +5 to +35°C
Operating Humidity Range: 5 to 90% (no condensation)
Discs Played:
(1) DVD-VIDEO Disc: 12 cm single-sided, single-layer / 12 cm single-sided, dual-layer
12 cm double-sided, single-layer / 8 cm single-sided, single-layer
8 cm single-sided, dual-layer / 8 cm double-sided, single-layer
(2) Compact Disc: 12 cm disc / 8 cm disc
Specifications are subject to change without notice. Weight and dimensions are approximate.
Using the Setup Menus
Press the SETUP button to display the player’s main menu.
The setup menu lets you customize the DVD player by allowing you to select various language
preferences, set up a parental level and screen saver on/off, adjust what type of TV screen you
have and more. Enter the Setup Menu by pressing SETUP button.
Use the Navigation (
, , , ) buttons to navigate through the menus/screens and press the
ENTER button to select the highlighted option. To exit the Setup Menu, press the SETUP button.
Z o o m
Press this button (Zoom 2x, 3x, 4x) during normal, slow or still playback mode. This player can mag-
nify a picture and use direction buttons (
, , , ) to select desired part of the zoomed picture.
Notes:
• For JPEG files, press ZOOM and then REV or FWD until you reach the zoom size you require.
Press ZOOM again to quit the zoom function.
• DivX disc support this function. WMA and MP3 discs does not support this function.
Angle
Viewing from a desired camera angle (Multi-Angle) [DVD]
Some DVD discs may contain scenes which have been shot simultaneously from a number of
different camera angles. The jacket or case of discs that are recorded with angle will be marked.
Note: The recorded angles differ depending on the disc used.
1. Play the disc that is recorded with angles.
2. Press the ANGLE button “ ” appears on the screen.
3. Press the ANGLE button again to choose the desired angle, TV screen will change within one
or two seconds.
3D Sound
3D audio post-processing will give a multi-channel effect when using only 2 speakers. This only
works with discs encoded with Dolby. Pro Logic, Dolby Digital audio tracks.
• Press the 3D button repeatedly to achieve the highest quality sound. For Disc playback the
following surround effects will appear on the TV screen when you press the 3D button repeatedly:
SURROUND ROCK, SURROUND POP, SURROUND LIVE, SURROUND DANCE, SURROUND
TECHNO, SURROUND CLASSIC, SURROUND SOFT, SURROUND OFF
• DO NOT USE the feature if connecting to more than two speakers or if using coaxial or optical
digital output to acquire digital audio sound. Turn off the TV surround sound and other surround
sound effects when using this surround effect.
M u t e
Press the MUTE button once to mute the sound, “MUTE” will appear on the TV screen, press the
MUTE button again to restore the sound.
Storing Bookmarks in the Memory to be Viewed
Storing a bookmarks in the memory is similar to marking your page in a book. You can quickly go
to any point on the disc.
Note: Some discs may not work Bookmark function. Storing, playing, and clearing a bookmark in the
memory, up to 12 points can be memorized for each disc.
1. Press the BOOKMARK button during play appear on the screen.
2. Press the PLAY button to choose start marking.
3. Press the Navigation button ( ) to go to the new bookmark space.
4. Press the BOOKMARK button to leave Bookmark section.
5. Press the Skip ( / ) or Search ( / ) buttons to go to desired Title/Chapter section.
6. Press the BOOKMARK button to enter Bookmark section.
7. Repeat step 2 to 6 to program Bookmark.
8. Press the Navigation buttons ( / ) to go to your desired Bookmark position.
9. Press the PLAY button to choose start Bookmark play. The playtime will display on screen.
10. Repeat step 8 to 9 to play Bookmark.
11. Press the CLEAR button to clear the old bookmark marking.
12. Exit the Bookmark section by pressing the Bookmark button.
Note: DivX, WMA & MP3 discs does not support this function.
Display button (OSD)
The display appears across the top of the screen when you press the DISPLAY button on the remote
while playing a disc. Press the DISPLAY button repeatedly to scroll through playback information.
MP3/WMA Basic Operations
Playback of MP3/WMA CD
1. Press the STANDBY button to turn on the unit. If turned on with the remote control, the
STANDBY indicator will go out.
2. Press the EJECT button to open the disc tray. Insert an MP3 disc with the label side facing up on the disc tray.
3. Press the EJECT button to close the disc tray. “Loading” will appear on the TV screen. If your
MP3 disc contains more than 99 music tracks, the 2 orange digits on the player display that
shows the disc total tracks will flash continuously to indicate the hundredth digit.
4. After loading, the Folder/Track Menu will appear on the TV screen. Press the Navigation ( , )
buttons to select your desired track.
5. Press the ENTER button to confirm to play the track.
6. Press the STOP ( ) button to stop playback.
Selecting a Folder Menu
Press the Navigation (
) button when stop mode, then press the ENTER button. FOLDER MENU
will appear, press the Navigation ( , ) buttons to select the desired folder, then press the ENTER
button to choose the folder.
Return
Press the RETURN button to quickly go back to the menu page only when VCD version 2.0 disc is
playing and PBC function is ON.
Digest (DVD and VCD)
Two digest types can be summarized from “Select Digest Type” Menu:
1. Track Digest: Choose your track starting picture by inputting number buttons and press enter to
confirm.
2. Disc Internal: Choose your 10 minute start-picture track by inputting nember buttons and press
enter to confirm.
Digest (CD)
Start the 6 second CD Scan function by pressing the DIGEST button when playing a CD.
Clear
Press the CLEAR button to erase a wrong input number.
Playback Control (PBC)
• The Playback Control feature is available only on Video CDs. Press the DVD MENU button to
turn the PBC feature on and off. The Playback Control feature supports the menus of the VCD
format similar to a DVD menu.
• When playing VCD with PBC function, you can enjoy simple interactive solfware on TV screen.
• When playback, there are such functions as track selection, stop, previous/next scene, fast
forward/backward, return, play/pause for you to select.
• PBC functions can be auto run after the disc is loaded.
• Desired tracks can be selected by pressing numberic buttons when PBC functions are on. After
selected, press ENTER, player will start playing the desired track.
Screen Saver
Start the screen saver, the screen saver image appears when the unit stops or the image is
motionless for approximately 1 minute. This saver can keep the screen from being damaged.
• ON: Start the screen saver.
• OFF: Remove the screen saver.
HDMI Setup
If you are using the DVD Player’s HDMI output to connect to your TV, set the HDMI Setup option to
the resolution that matches your TV. See the user’s guide that came with your TV for information
on the highest resolution your TV supports.
HDMI Audio
Select the SPDIF or PCM (Pulse Code Modulation) format to output your Audio signal.
Note: There is no DTS decoder built-in the unit. If you selected DVD disc to DTS output, there
is no sound output from TV. Use AUDIO MENU button at remote control to other audio
outputs.
VOD
DivX VOD files are downloaded after paying a rental from certain commercial websites. Prior to
downloading a VOD you need to input the registration number of your DVD player on the purchase
form on the site. Follow the instructions below to find the registration number of your player: press
the SETUP button. Select the VOD option from the General Setup Menu and press OK. Write
down this VOD 8-character registration number so that you can fill in the form on the website you
purchase your DivX VOD files from.
Note:
If you cannot play a DivX VOD file recorded on a CD-R disc after downloading it, the rental period
allocated during purchasing from the website may have expired. It is also possible that the
recorded file is not compatible with your player because of different versions or incorrect download
parameters. The parameters used when copying to CD-R may be another reason for this. Since it
is not possible here to supply all the information, parameters and advice relating to the use of
DivX VOD files, we recommend that you visit specialist websites such as www.divx.com/vod.
Region Management Information
This DVD/CD player is designed and manufactured to respond to the Region Management
Information that is recorded on a DVD disc. If the Region number described on the DVD disc
does not correspond to the Region number of this DVD/CD player, this DVD/CD player cannot
play this disc.
The Region number for this DVD player is .
DVD Disc
There are the marks on some DVD disc package.
Notes:
• Only the above types of discs can be played on this unit.
DVD-ROM, CD-ROM, CDV, etc. cannot be played.
Some CD-R and CD-RW discs cannot be played depending on the condition of the player and
the disc.
• This unit is to be used exclusively with the NTSC or PAL colour system. SECAM system discs
cannot be used with this unit.
DVD Disc
DVD discs are divided into titles, and the titles are sub-divided into chapter.
Music CD Disc
Music CD discs are divided into tracks.
Notes on handling discs
• Do not expose the disc to direct sunlight, high humidity, or high temperatures for extended
periods of time.
• Discs should be returned to their cases after use.
• Do not apply paper or write anything on the disc surface.
• Handle the disc by its edge. Do not touch the playing surface (glossy side).
Fingerprints and dust should be carefully wiped off the playing surface of the disc with a soft
cloth.
Wipe in a straight motion from the centre to the outside of the disc.
• Never use chemicals such as record cleaning sprays, antistatic sprays or fluids, benzene or
thinner to clean discs.
This product incorporates copyright protection technology that is protected by method claims
of certain U.S. patents and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright protection technology must be
authorized by Macrovision Corporation, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Apparatus Claims of U.S. Patent Nos. 4,631,603; 4,819,098; 4,907,093; 5,315,448; and
6,516,132 licensed for limited viewing uses only.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
HDMI and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
Symptom (Video CD) Remedy
No menu play. • This function works only for Video CDs with playback
control.
In case of malfunction due to electrostatic discharge, reset the apparatus by disconnecting from
mains supply.
General Setup Page
Audio Setup Page
Exit Setup Menu
Preference Page
Dolby Digital Setup
- - General Setup Page - -
Go To General Setup Page
TV Display
TV Type
Video Out OSD Lang
Screen Saver HDMI Setup
HDMI Audio
VOD
Dolby
PS
PAL
ON
ON OFF
PCM
Password Change
You can change the Password code by following the Procedures of the Password Change Page:
PARENTAL lock depends on DVD’s disc.
1. Press the ( , ) Navigation Arrow buttons to select Password section.
2. Press ( ) Navigation Arrow button and press Enter to enter the Password Change Page.
3. Enter the 4-digit code to the Old Password column. If Password is incorrect, please re-enter
your Password code to the Old Password column again. If Password is correct, the player will
jump to the New Password column automatically.
4. Enter your desired 4-digit code new Password to the new Password column. The player will
jump to the Confirmed Password column automatically.
5. Enter your new password code again to the Confirmed Password column to confirm your new
chosen Password. Press Enter to confirm this change. From now on you must enter your new pass-
word code to the Password Verify Page to confirm your newly changed Rating level selection.
Default
Select the Default option and then the Reset option to reset all the functions to their original
settings.
Preference Page
You must stop playback to enter preferences mode.
The setting structure is:
- - Preference Page - -
Audio English
French
Spanish
German
Japanese
Subtitle English
French
Spanish
German
Japanese
Off
Disc Menu English
French
Spanish
German
Japanese
Parental 1 KID SAF (Kid Safe) 2 G (All ages)
3 PG (Parental Guidance)
4 PG 13 (Parental Guidance less than 13 years old)
5 PGR (Under 17 years old. Parental Guidance suggested)
6 R (Under 17 years old. Parental Guidance strongly suggested)
7 NC 17 (17 years old and above)
8 ADULT (Adult only)
Password Change
Default Reset
Select Languages and Menus
If a language of unit mentioned above is recorded on the disc, you can select sounds, subtitles, or
disc menu languages of player. If not the language recorded on the disc is shown.
Parental
Select your desired Rating level “1” to “8” to disable the playing of specified DVDs which are
unsuitable for children.
1. Press ( , ) Navigation buttons to select Parental section.
2. Press ( ) and then ( , ) Navigation buttons to select your desired Rating level. Press ENTER
to go into the Password Verify Page. If not select (Parental) rating level, press “Open” to leave
and not input password.
3. Input your present Password in the Password Verify Page. (Factory preset Password: 1234)
4. If your password is incorrect, please re-enter your password again. If your password is correct,
press Enter to confirm your Rating level selection.
5. The Old Rating level will change to your desired new Rating level.
Note: The Password code is set by yourself on the Password Change Page.
Dolby Digital Setup
The setting structure is:
Dynamic
Select your desired Dynamic Range Compression Rate (DRC) to adjust linear compression results
of the signals.
1. Select Dolby and press ( , ) Navigation arrow button to enter Dynamic setting mode.
2. Press ( ) Navigation arrow button to highlight the DRC level indicator.
3. Press ( , ) Navigation buttons to select your DRC rate level.
4. Press Enter to confirm your selection.
5. Press Setup to exit the Setup menu.
• Press the Navigation ( , ) buttons to select the Center, LS, RS or Subwoofer Speaker
respectively. The selected speaker as desired will turn yellow on the TV screen.
• Press the Navigation ( , ) buttons to adjust the speaker delay of your speaker selection.
Center Speaker Delay: 0 cm to 170 cm.
LS Speaker Delay: 0 cm to 510 cm.
RS Speaker Delay: 0 cm to 510 cm.
Subwoofer Speaker Delay: 0 cm to 510 cm.
Symptom (DVD) Remedy
Play does not start even when • Confirm the RATING LEVEL setting.
title is selected.
Audio soundtrack and/or subtitle • If the audio soundtrack and/or subtitle language does not
language does not appear in exist on the language selected at the initial settings will not
the disc initial settings. be seen/heard.
No subtitles. • Subtitles appear only with discs which contain them.
• Subtitles are cleared from the TV monitor.
Alternative audio soundtrack • An alternative language is not selected with discs which
(or subtitle) language fail to do not contain more than one language.
be selected.
Angle cannot be changed. • This function is dependent on software availability. Even
if a disc has a number of angles recorded, these angles
may be recorded for specific scenes only.
The password for rating level • Please contact your local sales dealer or enter super-
has been forgotten. vision code 1369.
Troubleshooting
Before requesting service for this player, check the chart below for a possible cause of the problem
you are experiencing. Some simple checks or a adjustment on your part may eliminate the
problem and restore proper operation.
Symptom (Common) Remedy
No power • Insert the AC power plug securely into the power outlet.
Play fails to start even when • Condensation has formed: wait about 1 to 2 hours to allow
PLAY is pressed. the player to dry out.
Play starts but then stops • This player cannot play a disc other than DVD, Video CD
immediately. and CD.
• The disc may be dirty and may require cleaning.
• Ensure that the disc is installed with the lable side up.
No picture • Ensure that the equipment is connected properly.
• Ensure that the input setting for the TV is “Video”.
No sound • Ensure that the equipment is connected properly.
Distorted sound. • Ensure that the input setting for the TV and stereo system
are correct.
Picture is distorted during rapid • The picture will be somewhat distorted at times: this is
advance or rapid reverse. normal.
No rapid advance (or rapid • Some discs may have sections which prohibit rapid
reverse play). advance (or rapid reverse.)
No 4:3 (16:9) picture. • Choose the correct setup “TV SCREEN” item which
matches the TV set used.
No operations can be performed • Check the batteries are installed with the correct polarities
with the remote control unit. (+ and – ).
• The batteries are exhausted: replace them with new ones.
• Point the remote control unit at the remote control sensor
and operate.
• Operate the remote control unit at a distance of not more
than 6m from the remote control sensor.
• Remove the obstacles between the remote control unit and
remote control sensor.
No key operation (by the main • Press STANDBY to set the player to the standby mode and
unit and/or the remote control then back to ON. Alternatively, press STANDBY to set the
unit) is effective. player to the standby mode, disconnect the power plug
and then re-connect it. (The player may not be operating
properly due to lightning, static electricity or some other
external factor.)
4
General Setup Page
TV Display
1. Normal/PS:
“PS” stand for “Pan Scan” This is selected when the unit is connected with a normal TV.
Wide-Screen images are shown on the screen, but with some parts cut automatically.
2. Normal/LB:
“LB” stand for “Letter Box” This is selected when the unit is connected with a normal TV.
Wide-screen images are shown on the screen, with black belt on the top and bottom.
3. Wide Screen:
This is selected when the unit is connected with a wide - screen TV.
TV Type
You may select according to the color system of the TV to be connected.
• Select “NTSC” for a NTSC TV.
• Select “PAL” for a PAL TV.
Video Out
Select the color video type and switch mode to fit your connector type:
CVBS: Select when using CVBS composite Video Output and S-Video Output (if S-Video
connector is provided.)
YUV: Select when using Component Video Outputs.
OSD Lang
• English: The OSD is in ENGLISH.
• Spanish: The OSD is in SPANISH.
• German: The OSD is in GERMAN.
• French: The OSD is in FRENCH.
- - Audio Setup Page - -
Go To Speaker Setup Page
Dolby
Speaker Setup
Channel Delay
0cm Sub Woofer
- - Audio Setup Page - -
Center
Dolby
Speaker Setup Channel Delay
- - Dolby Digital Setup - -
Dynamic Range Compression
Dynamic FULL
OFF
1/2
3/4
1/4
Web: www.soniqav.com
Customer Hotline: 1300 765 663
SONIQ QPD500B_Engib.p65 9/13/2006, 9:41 AM 2