SONIQ QMI92GB - Manual (Page 17)

-16-
Video
1. Press the SETUP button in stop mode.
2. Press the / button to select Video.
3. Press the button, then the / button to select the option (Aspect
Ratio, View Mode or Video Out Only).
4. Press the ENTER button, then press the / button to shift and change
the selection, then press the ENTER button.
5. Press the button to return to the previous menu. Press the SETUP or
RETURN button to exit the menu.
Aspect Ratio
• The displayable picture size is preset on the DVD. Therefore, the playback picture of some DVDs may not
conform to the picture size selected.
• When you play DVDs recorded in the 4:3 picture size only, the playback picture always appears in the 4:3
picture size regardless of the Aspect Ratio setting.
• Select 16:9 to conform to the LCD screen on the unit. Always be sure that your Aspect Ratio conforms to the
actual TV in use if you connect the unit to a TV.
View Mode
Fill Fill the screen with decoded image.
Original Display image as it’s original size.
Auto Fit Automatically fi t the decoded image on screen without distortion. Black bars will be present on top/
bottom or left/right of screen.
Pan Scan Select when a standard 4:3 TV is connected. Displays pictures cropped to fi ll your TV screen. Sides of
the picture are cut off.
Note:
Depending on the DVD, you may not be able to view the mode as selected.
Video Out Only
For Video Out Only, use the / button to select On and press the ENTER button, the unit will output the video to
the TV only and the unit TFT LCD screen will be off. The unit TFT LCD screen will be on again automatically after
the unit is power off and on again.
Language
1. Press the SETUP button in stop mode.
2. Press the button, then the / button to select the option (OSD
Language, Subtitle, Audio or DVD Menu).
3. Press the ENTER button, then press the / button to shift and
change the Language, then press the ENTER button.
4. Press the button to return to the previous menu. Press the SETUP or
RETURN button to exit the menu.
Notes:
• Some DVDs are programmed with a specifi c language. You may not be able to change this feature.
• Some DVDs allow you to change languages via the disc menu only. If this is the case, press the MENU button
and choose the appropriate languages from the selection on the disc menu.
Customizing the Function Settings