SONIQ MB206 - Manual (Page 3)

~220-240V/50Hz
3
Production component
4
Using the Speaker
Basic Operations
2. /M: Press the /MODE button to turn the unit on.
Press and hold this button to turn to the STANDBY mode.
3. Mode selection: press /MODE repeatedly to select modes:
Bluetooth, Audio, USB. And the indicator lights use different
colors and flash status to show the mode status.
a) Every time you power the system on, it automatically enters
the first mode: Bluetooth, the indicator flashes blue quickly,
it’s inBluetooth pairing status.
b) Press /M button once to enter the second mode: Audio,
when the indicator flashes yellow still, it enters the Audio mode.
c) Press /M button twice to enter the third mode: USB, the
indicator flashes yellow slowly, it enters the USB mode.
4. : Press the PHONE button to pick up a phone call.
5. : Press the PLAY/PAUSE button to pause the music, press
again to resume playback.
6. / : Press the PREVIOUS /NEXT buttons briefly to
skip to the previous or next tracks/songs.
7. VOL+/VOL- : Press the VOL+/VOL- buttons to adjust the volume
to a comfortable level.
8. MIC: The MIC is for speaking when answering a phone call, if the
caller can not hear you, please speak closer to speaker
system microphone.
Indicator light
Speaker
USB Port
Speaker ventilation
Play/Pause
Phone button
Previous/Volume down
Standby/Mode
Microphone
Next/Volume up
Power on/off
Power supply
Audio input L/R
Front panel
Rear panel
1. Power ON/OFF: Press the POWER ON/OFF button on the rear
panel to power on or off the unit.