Soleus GPS Pulse (SG008) - Manual - Manual (Page 5)

Soleus GPS Pulse
Night mode settings:
• 10 SECONDS – Press S11 will turn ON the Light for 10 seconds.
• 20 SECONDS – Press S11 will turn ON the Light for 20 seconds.
• NIGHT ON – Default Start Time / END Time for NIGHT ON setting is 5 PM to 7 AM.
Following are the characteristics of NIGHT ON setting:
o Start Time and END TIME for NIGHT ON setting can be changed in SET
mode/ NIGHT.
o When the Night setting is ON, pressing any button within the Start Time / End
Time will turn ON the EL for 10 seconds.
o Outside the Start time / End Time, only press S11 will turn ON the EL for 10
seconds.
o When the chronograph is running within the Start Time/ End Time, the EL will
be always ON. It will turn OFF 10 seconds after the chronograph is stopped.
How to set the LCD display CONTRAST:
•
Press S5 while CONTRAST is blinking. Contrast percentage will start to blink.
• Press S1/S11 to change to your desired value. LCD Contrast range is from 10 to 100%.
• Press S5/S7 to exit to CONTRAST setting screen
Contrast range = 10 to 100%
How to set the CHIME:
• Press S5 while CHIME is blinking.
• Press S1/S11 to change to CHIME ON or OFF.
• Press S5/S7 to confirm and exit setting.
How to set the ALARM and CHIME:
• Press S5 while ALARM is blinking. AL-1 will start to blink.
• Press S1/S1 to toggle through Alarm 1 to alarm 5. The watch has 5 alarms which can be
set individually
• Press S5 to set the selected Alarm number. The HOUR digit will start to blink.
• Press S1/S11 to change the hour digit.
• Press S5 to confirm and set the MINUTE digit. The minute digit starts to blink.
• Press S1/S11 to change the minute digit.
• Press S5 to confirm and set the T1 or T2 setting. T1 or T2 starts to blink. The alarm time
will be referred to Time 1 or Time 2.
• Press S1/S11 to change setting
• Press S5 to confirm. Alarm ON or OFF will start to blink.
• Press S1/S11 to change the setting.
• Press S5 to confirm. Daily Alarm OFF or ON (MON/TUE/WED/THU/FRI/SAT/SUN) will
start to blink.
• Press S1/S11 to confirm the setting.
• Press S7 in any alarm screen. The watch will display CHIME ON.
• Press S1/S11 to change to CHIME OFF or ON.
• Press S7 to confirm and exit to CHIME setting screen