Rite-Ride 4196 - Manual (Page 3)

www.riderite.com
OPERATING PRESSURES:
MINIMUM (UNLOADED) 5 PSI
MAXIMUM (LOADED) 35 PSI
STEP 9 — COMPLETION
This now completes the installation. Install the wheels and tires
back onto the vehicle and torque to manufacture’s specification.
If the shock absorber was removed attach the shock absorber
and torque to manufacture’s specifications. Raise the vehicle
and remove the jack stands and lower the vehicle back onto
the ground. Re-attach the negative battery cable.
NOTE: Check air pressure on a monthly basis