Casio EX-Z10 - Manual (Page 96)

96
OTHER RECORDING FUNCTIONS
Shutter speed
Movement
Slow Fast
60 seconds 1/2000 second
Blurred Stopped
3. Use [
̆] and [̄] to select the shutter speed
value (page 33) in the exposure panel, and
then use [
̇] and [̈] to change the setting.
• If you are using manual focus (pages 33, 85), you
can also use [ ̆] and [̄] to select “FOCUS” (manual
focus adjustment), and then use [ ̇] and [̈] to focus
manually.
4. Press the shutter button half way.
• This causes the camera to adjust focus automatically.
5. When the image is focused, press the shutter
button all the way down to record.
Exposure Mode Recording Precautions
• You may not be able to achieve the brightness you want
when recording an image that is very dark or very bright.
If this happens, use the M mode (manual exposure) to
adjust the aperture or shutter speed manually.
• Using slow shutter speeds can cause digital noise
(graininess) to appear in the image. Because of this, the
camera automatically performs a digital noise reduction
process whenever the shutter speed is 1/8 second or
slower. The slower the shutter speed, the greater the
possibility that digital noise will be generated in an image.
Also note that the digital noise reduction process can
cause it to take longer to record each image.
• At shutter speeds slower than 1/8 second, the brightness
of the recorded image may not be the same as the
brightness of the image that appears on the monitor
screen.