RiME LITE XB WIFI User Manual
Page 32

32
OPERATION INSTRUCTION
1. POWER ON / OFF
- Use the on / off switch when new XB-T power turn on / off. Please turn it off after using.
2. STROBE POWER ON/ OFF
- When pushing the TEST button for 3 sec. used strobe will turn on / off.
3. SELECTING GROUPS and SEQUENTIAL FIRING
- Select any group very easily with 4 switches.
GROUP
NEW XB-T
A
s/w1=up, s/w2=down, s/w3=down, s/w=down
B
s/w1=down, s/w2=up, s/w3=down, s/w=down
C
s/w1=down, s/w2=down, s/w3=up, s/w=down
D
s/w1=down, s/w2=down, s/w3=down, s/w=up
E
s/w1=up, s/w2=up, s/w3=up, s/w=up
Sequential Firing
s/w1=down, s/w2=down, s/w3=down, s/w=down
Set up one strobe in group-A and another strobe in group-B first.
And then you make all switches down, the strobes are under the mode of Sequential Firing.
4. NOTICE
♦
Use 2pcs of AA battery
♦
Please replace new batteries when LED light is dim and it doesn't work.
♦
After turn off new XB-T, please change the group.