RiME LITE XB WIFI User Manual
Page 13

13
How to set Remote Control
A. Most operating way is same with the XB Prime’s Operating Instruction.
B. The differences are only a few.
1. “POWER” button
Turn on the power of Remote Control.
2. “XB” button
This button is for the start of all performances of each strobe/channel.
Press this button when you need to perform any functions of each strobe.
Press “POWER” button and select the studio group (A to E) and then select the
strobe/channel (1 to 10) and then press the “XB” button.
And now you can control all functions of selected strobe.
When pressing “XB” button for 3 seconds, it starts ACS mode can be set the exposure value
by F1.1 (1.1 f-step).
3. “CELL” button
Photocell On / Off
4. “SOUND” button
Sound On / Off
5. “PROP” button
Press it shortly: proportionally power on / free modeling lamp.
Press it for 2 or 3 seconds: modeling lamp continuously turns on / off.
6. “TEST” button
By pressing this button, test flash can be released.
7. “STROBE OFF” button
Pressing this button can turn on / off the selected strobe’s power.
You should select the strobe you want to turn on / off before pressing this button.
8. “SCAN” button
You can check the current connected strobes with this function.