RiME LITE XB WIFI User Manual
Page 30

30
Operation Instruction for SWING
Before you use SWING with XB PRIME, please power off strobes. You will experience the great performance of both strobe and SWING.
Transmitter
- Join the transmitter to a digital camera
Receiver
- Join the receiver to a strobe.
Notice) when a user set the channel of SWING, the user should adjust the same number of both transmitter and receiver.
It can set the maximum 6 strobes per a transmitter under the same channel
If a user uses over 6 strobes under the same channel, the effective distance from both a transmitter and a receiver can be shorter.
TEST Button
The LED lamp is flickered when a user presses “TEST” button.
This manual is related to the following products: