Revel C30 - Manual (Page 6)

Figure 3. A REVEL
PERFORMA C30 loudspeaker
with its inner packing materials.
UNPACKING
To avoid injury, please use care during unpacking. Always
stand as straight as possible and use your leg muscles to lift the
REVEL PERFORMA C30 loudspeaker. Do not lift it while
bending from the waist.
To unpack the REVEL PERFORMA C30 loudspeaker, perform
the following steps:
1. Place the REVEL PERFORMA C30 loudspeaker onto its side.
2. Open the bottom flaps. Stand the carton in the up position.
3. Lift the carton off the loudspeaker and set it aside, being careful
not to damage the contents (see Figure 3).
4. Remove the spike foot kit and set it aside.
5. Remove the left and right pads and the protective bag. Use cau-
tion to avoid scraping the finish or pulling off the grille.
After unpacking the unit, carefully inspect it for possible damage
due to shipping. If you discover any damage, immediately contact
your Revel dealer for further assistance. When moving a REVEL
PERFORMA C30 loudspeaker (e.g., when experimenting with
placement), avoid touching the transducers.
Keep all packing materials for future shipping. In the unlikely
event a product will need repair, Revel will only accept a unit in its
original shipping carton. Using any other packing materials may
result in damage to the product and is not covered by the warranty.
See Obtaining Service on page 18 for additional details.
REVEL PERFORMA C30
Owner’s Manual
6
Warranty Card and
Owner’s Manual
Spike Foot
Kit
Left Pad
Right Pad
Protective
Bag
WARNING