Reloop IQ.2+ USB - Manual (Page 30)

Depending on the effect, the time parameter's type and interval and the
adjustments according to the beat assignment buttons -24-, will differ.
• ECHO = echo effect
Continuously repeats a certain interval of the signal.
Time parameter value: 2 – 2000 msec
Direct bar assignment: Intervals adjustable from 125 – 2000
By turning the X parameter knob -25- the value will be changed in steps of 1.
Push, hold and turn the X parameter knob -25- and the value will be changed in
steps of 100.
Y parameter dry/wet value: 0 - 100%
• AUTO PAN = panorama effect
Produces the signal's continuous fading of the signal from the left to the right
channel and back again.
Time parameter value: 30 – 65000 msec
Direct bar assignment: 500/1000/2000/4000/8000/16000 msec
By turning the X parameter knob -25- the value will be changed in steps of 1.
Push, hold and turn the X parameter knob -25- and the value will be changed in
steps of 100.
Y parameter dry/wet value: 0 - 100%
• FLANGER = flanger effect
Doubles the signal and shifts it by a marginal value.
Time parameter value: 100 – 65000 msec
Direct bar assignment: 500/1000/2000/4000/8000/16000
By turning the X parameter knob -25- the value will be changed in steps of 1.
Push, hold and turn the X parameter knob -25- and the value will be changed in
steps of 100.
Y parameter dry/wet value: 0 – 100%
• MANUAL FILTER = HiPass/LowPass filter effect
With this effect you can manually control a Hipass and LowPass filter effect
respectively.
Time parameter value: LowPass 0.05 – 20.2 Hz / HiPass 0.13 – 21.1 Hz
Direct bar assignment: LowPass 0.45/2.27/7.13/18.4 Hz – HiPass 1.63/5.73 Hz
By turning the Xparameter knob -25- the value will be changed in steps from 0.2
– 0.4. Push, hold and turn the Xparameter button -25- and the value will be
changed in steps of 0.1.
• AUTO FILTER = HiPass/LowPass filter effect
Filters high and low frequencies alternately according to the adjusted bar value.
Time parameter value: 100 – 65000 msec
Direct bar assignment: 500/1000/2000/4000/8000/16000 msec
By turning the X parameter knob -25- the value will be changed in steps of 10.
Push, hold and turn the X parameter knob -25- and the value will be changed in
steps of 100.
Y parameter dry/wet value: 0 – 100%
30
ENGLISH
IM_IQ2.qxp 10.07.2008 14:28 Uhr Seite 30