Reloop MIXAGE CE LTD. - Manual (Page 28)

ENGLISH
28
5. DEVICE SETTINGS AND TESTS
There are a few settings and tests which can be carried out directly with Mixage without the need
for a computer. In the following a few points will be explained more thoroughly.
Element Function Function with activated Shift -T3-
T19 Play/Pause Button
Starts and pauses the track‘s playback respec-
tively. Cue 4 Button
Sets and triggers the 4th cue
point.
T20 TRAX Encoder (Tracklist Navigation)
- By turning the encoder it is possible to scroll
through the track list.
- By pressing the encoder browser view will be
maximized.
TRAX Encoder (Folder Navigation)
- By turning the encoder it is possi-
ble to navigate through the folders.
T21 Track Load Button
Assigns the selected track to the deck. Load Button
Open folder [L], close folder [R]
T22 High Dial
Regulates the high EQ.
T23 Mid Dial
Regulates the mid EQ.
T24 Low Dial
Regulates the bass EQ.
T25 Cue Button
By pressing one of the Cue Buttons the mo-
nitoring function for the selected deck will be
activated. Cue Button
Track Pre-Listen Play [L] / Stop
[R]
T26 Linefader
Regulates the respective channel‘s volume.
T27 Master Volume Dial (analog, not software)
The dial adjusts the master output‘s volume.
T28 Phones Dial (analog, not software)
The dial adjusts the headphones‘ volume.
T29 Cue Mix Fader
With the Cue Mix Fader it is possible to simu-
late a pre-mix via the headphones. In the right
position the master signal is audible, in the left
position the cue signal is audible.
T30 Power Status LED
Illuminated when the controller is turned on, if
voltage is provided.
T31 MIDI Status LED
Illuminated when MIDI signals are sent.
T32 Master Level LED Indicator
Optically displays the master output level.
T33 Crossfader
Crossfader between ch.1 and ch.2