RCBS RASS - Manual (Page 7)

7
remove it by removing the rear Seat Extension Quick Pin and sliding the Seat off. Remove the front Seat Extension Quick Pin to fold
down the Seat and reinstall the Quick Pin in place. Grasping the Handle on the Lower Hub and raising it upward will allow the Legs to
fold down on themselves. Secure the Legs with the provided Cinch Strap (see Photo 13). The R.A.S.S. Bench is now ready for
transportation to your favorite shooting or hunting spot.
Once you have arrived at your shooting or hunting spot, select the most level ground to shoot from. Place the Lower assembly in place
and remove the Cinch Strap. Remove the front Seat Extension Quick Pin, raise the Seat Extension and reinstall the Quick Pin.
Carefully unfold the Legs and adjust the Leg Extensions and Leveling Feet so that the Lower assembly is stable. Place the Center
Support onto the Lower assembly and tighten the Knob. Place the Rifle Rest onto the Center Pivot Rod and tighten the Cam Lock
Lever.
Leg Assembly
Item # Part # Quantity Description
1 9320-105 1 1/2" x 1.9"L Quick Pin
2 9320-117 1 3mm Spring Pin, Slotted
3 9320-21 1 Main Support Leg
4 9320-22 1 Leg Extension
5 9320-23 1 Foot Adapter Block
6 9320-24 1 Acme Rod Bushing
7 9320-25 2 M5x0.8 x 6.5mm L Skt Set Screw
8 9320-26 2 6mm Spring Pin, Slotted
9 180101 1 Acme Rod
10 180102 2 Leg Bushing
11 180103 1 Rubber Foot
12 180104 1 Knob
6
9
1
3
4
5
7 8
10
11
7
10
2
12
Shaft and Hub Assembly
Item # Part # Quantity Description
1 9320-10 1 Steel Hub Assembly
2 9320-100 9 M12x1.75x 60mm L Hex Bolt
3 9320-101 10 M12x1.75 Acorn Nut
4 9320-102 1 M12x1.75x110mm Hex Bolt
5 9320-105 1 1/2" x 1.9"L Quick Pin
6 9320-106 1 1/2" x 3.3"L Quick Pin
7 9320-107 5 M5x0.8 x 16mm S.H. Cap Screw
8 9320-119 4 Leg Support Block
9 9320-120 1 Wedge Bolt Assm.
10 9320-121 1 Shaft Lock Assembly
11 9320-14 1 Main Shaft
12 9320-15 1 Shaft Wedge
13 9320-17 1 Retaining Collar
14 9320-18 1 Bottom Cap
15 9320-19 1 M10x1.5 Thread Insert
16 9320-31 1 Steel Seat Collar Sub-Assembly
17 180106 2 Roller Bearing Assembly
18 180107 1 Thrust Washer
1
2
3
4
5
6
11
12
13
14
15
16
17
18
7
2
3
3
2
9
10
7
8