RCBS Competition Dies - Manual (Page 5)

After adjusting the die, tighten this setscrew
to hold the proper setting.
A label is provided with each die box for
recording your favorite loads.
tion by lightly tightening the setscrew. The die will then hold the proper set-
ting and may be reused in the same press without readjustment.
Competition Die Sets are furnished with a n e x t e n d e d s h e l l h o l d e r
where needed for reloading short cases. The competition extended shell
holder is only used with the competition seater die. A standard RCBS
shell holder should be used with the competition sizer die.
PACKAGING
All RCBS Dies are packaged in convenient plastic storage boxes spe-
cially designed by RCBS to protect your dies in shipment and during stor-
age. A unique cradle holds the dies firmly in place to prevent damage
and rolling around. Each box contains a label for recording your favorite
loads and can be mounted on the inside lid for quick reference. A label
on the outside of the box lists the die caliber for easy identification.