Photogenic Professional Lighting StudioMax II - Manual (Page 6)

6
Power Switch:
The power switch controls the AC power to both the modeling and flash circuits.
You have the option to turn-off the modeling circuit (center switch position).
Flash Power:
All settings and controls of the
Studio Max II are extremely stable and repeatable
due to the use of an internal microcomputer. The AK320 and AK320B are
adjustable from 10 watt seconds to 320 watt seconds. The AK160 and AK160B are
adjustable from 5 watt seconds to 160 watt seconds.
To adjust the
Studio Max II to its lowest flash power setting (5 or 10 watt
seconds), rotate the FLASH POWER control knob fully counter clock-wise.
To adjust the Studio Max II to its greatest flash power setting (160 or 320 watt
seconds), rotate the FLASH POWER control knob fully clock-wise.
Ready Light:
The Studio Max II is charged when the READY lamp is on. Lowest power (10 ws)
charge time is a maximum of .1 seconds and at full power charge (320 ws) time is a
maximum of 3 seconds. The unit may be flashed before fully charged.
Modeling Light:
The modeling light has two modes of operation:
1. With POWER switch in MODEL/FLASH position, the modeling lamp is
ON.
2. With POWER switch in FLASH position, the modeling lamp is OFF.
Test Function:
The TEST button is pressed to fire the flashtube for test purposes.