Pantum P3100DN - Manual (Page 50)

6-2
6. Control Panel
6.1. Overview of the Control Panel
The control panel includes a button, a multi-colored LED indicator (the LED indicator will display
red, green and orange), and a monochrome LED indicator, as shown in the figure below:
1 Button
2 Paper: Monochrome red LED indicator
3 Data/cartridge: multi-colored LED indicator
6.2. Control Panel's Button and LED Functions
1. Button Functions
By pressing the button you can fulfill the following functions:
• Print a DEMO page by a long press while in idle status;
• Print the font list page by short pressing twice while in idle status (This feature is available
with printers that support PS language);
• Wake up the printer from sleep mode;
• Resume printing after a feed failure (short press);
• Resume printing after loading paper in the tray (short press);
• Continue rubbing printing in case of paper source mismatch (short press);
• Continue printing after removing paper jam in the feeder (short press);
• Long press during the printing can cancel the current print job (long press);
• Restore to Factory Settings: In poweroff status, press the button to power on the printer for
restoring the factory settings.
2. Monochrome LED indicator function
The indicator will display red and an alert will sound in the case of paper
empty, paper jam, feed jam, paper mismatch, paper source and the set
paper source mismatch, etc.