Setting network products, Viewing or changing network settings, Setting network products -3 – Pantum P3100DN User Manual
Page 34: Viewing or changing network settings -3
4-3
4.2. Setting Network Products
4.2.1. Viewing or Changing Network Settings
You can use the printer embedded Web server to view or change its IP settings.
1. Print DEMO Information Page, for viewing the printer's IP address information.
DEMO information page can be printed by long press of the button on the control panel (as
shown in the figure below) in the idle status.
2. Type the printer IP address into the Web browser’s address line to open the embedded
Web server.
3. Click the tab to obtain network information. Change the settings as needed.
4.2.2. Setting or Changing the Login Password of a Web Page
Use the embedded Web server to set a network password or change the existing password.
1. To open the embedded Web server, please log in first.
2. Click Administrator Settings tab.
3. Type the new password in the Password box and Confirm Password box.
4. In the bottom of the window, click Modify button to save the settings.
Note:
• The default username is "admin" and the initial password is "000000".