Oven light – La Cornue AlberTine 36 User Manual

Page 12

ArtNo.320-0023

Oven light USA

To remove and refit the racks
The rack has a small kink on either side (Fig.2-20). To remove

the rack, line these up with the stops in the rack support

(Fig.2-21). Lift the rack upwards so that it will pass over the

rack stop and then pull it forwards (Fig.2-22).
Refit in the reverse order, making sure to push it fully back.

To remove and refit the telescopic rack and runners
Slide the rack out on the runners. While holding one of the

runners securely, carefully lift the rear of the rack upwards:

the rack will spring clear of the central restraining tab. Repeat

for the opposite side of the rack.
Note: To aid the removal of the shelf you can insert a suitable

flat tool through the opening in the side of the runners and

lever the rack clear (Fig.2-23).
Tilt the front of the rack downwards and then lift clear of the

runners (Fig.2-24).
Refit in the reverse order, making sure to push the rack down

onto the runner arms.

Oven Light

Press the appropriate button to turn on the oven lights.
If one of the oven lights fail, turn off the range circuit breaker

before you change the bulb. See the ‘Troubleshooting’ section

for details on how to change an oven light bulb (Fig.2-25).

Fig.2-20

Fig.2-25

Fig.2-21

Fig.2-22

Fig.2-23

Fig.2-24