Krell 707 Evolution - Manual (Page 7)

Menu Navigation
Conventions Navigate the setup menu using either the buttons on the front panel of the Evolution 707 or
the keys on the Evolution 707 remote control:
1. Press the menu button or key (32) to enter and exit the setup menu.
2. Press the direction buttons or keys (35) to scroll from line to line, and to scroll through
options within a line.
3. Press the enter button or key (34) to select a line and set an option.
4. Press the prev button or key (33) to return to the previous screen. Press the prev button
or key a second time to exit the setup menu.
Krell Evolution 707 7
4 SELECT MONITOR
RESOLUTION
Configure Video Screen
Enter CONFIGURE VIDEO OUTPUT to view the video output screen and select a monitor resolution
for the main zone. You have the option to set up a monitor resolution for Zone 2 from this
screen.
The main zone video output format default is set to 480p at 720 x 480 /60 Hz (576 P outside
of the USA). The zone 2 video output format default is set to 480i at 720 X 480/60 Hz (576 P
outside of the USA).
After setting your selections, press the prev button or key to return to the MAIN MENU screen.
5 LISTENING ROOM
SETUP
Listening Room Setup Screen
The Evolution 707 calibrates your listening room set up quickly, if you follow the procedure
outlined below. Select
LISTENING ROOM SETUP from the MAIN MENU screen. The LISTENING
ROOM SETUP screen appears.
Select AUTOMATIC SETUP from the LISTENING ROOM SETUP screen. The AUTOMATIC SETUP
screen appears.
Main Menu Screen IMPORTANT
Make sure that all source
devices are off when you
configure the Evolution 707.