Klimaire KTHM015-E5H2 PTAC Service Manual - Manual (Page 16)

14
- For existing sleeve, you should measure the
wall sleeve dimensions.
- Install the new air conditioner according to
these installation instructions to achieve the
best performance. All wall sleeves used to
mount the new air conditioner must be in good
structural condition and have a rear grille that
securely attaches to the sleeve or the flange of
the sleeve to secure the new air conditioner.
- To avoid vibration and noise, make sure the
unit is installed securely and firmly.
- When installing the sleeve, make certain there
is nothing within 20 of the back that would
interfere with heat radiation and exhaust air
flow. (See Fig.2)
PREPARATION OF SLEEVE ASSEMBLY
(optional)
- Refer to the installation instruction of sleeve
assembly for details.
UNIT INSTALLATION
- Carefully remove shipping tape from the front
panel. (See Fig.3)
- Remove the front panel. (See Fig.4)
- Remove the shipping screw from the vent
door.(See Fig.5)