Kino Flo Multi Flo (12 Lamp) - Manual (Page 2)

Connect cables, lamps or fixtures according to the flow
charts on pages 4-6.
The Multi-Flo operates on
120 VAC, 50/60Hz at 13.5
amps or 230 VAC, 50/60
Hz at 6.75 amps.
2
Turn on the Master power switch.
This switch also acts as a thermal
breaker. Should the Multi-Flo draw
more than 15 amps (120 VAC), 10
amps (230 VAC) or experience a short
circuit, the breaker will trip.
12 manual switches
control individual lamps
that are grouped into
three 4-Lamp circuits
(A, B, C ).
Red LED indicates
lamp off.
Green LED indicates
lamp on.
One 2ft/4ft select switch controls
the operating current for each
4-Lamp output (A,B,C)
Set selector switch to 4ft for 4ft
lamps and 2ft for 2ft and 15”
lamps.