Kino Flo Celeb 200 LED - Manual (Page 4)

4
Ballast Power
DC Input
The Celeb can also be operated on 24VDC through 3-Pin XLR. It can be
powered by a battery belt. The pin polarity is:
Pin #1 – Ground
Pin #2 + 18-28VDC
Pin #3 not used
Note: The Celeb will run approximately 2 hours on a battery belt.
A Low V warning will display when the battery is running low.
AC Input
The Celeb is powered AC with the built-in power supply with universal input
from 100-240VAC.
Note: When operating AC, attach the Velcro strap around the baby receiver
lollipop as a strain relief. The handles also provide an attachment point for a
safety chain if fixture is hung from a grid.