Kino Flo Celeb 200 LED - Manual (Page 10)

10
Applying Gel to Frame
Baby Offset Arm
Inserting Gel Frame and Louver
Option 1 - The Gel Frame comes with gel clips. Cut the gel to size and use the clips
to fasten the gel to the frame.
Option 2 – Apply transfer tape directly to the Gel Frame. The clips are not necessary
when taping the gel.
The Kino Offset w/ Baby Receiver (MTP-B41F) allows fixtures to mount on the
center of a stand or it can also be under slung from a baby stand to use as an up light.
The Celeb includes spring loaded accessory holders and two channels to hold the
Gel Frame and Honeycomb Louver.
Place the long edge of the Gel Frame or Honeycomb Louver into the lower channel.
Press down on the Gel Frame or Louver and slip the upper edge into the
upper channel of the fixture. To remove, reverse the procedure.
MTP-B41F Kino Offset w/
Baby Receiver (16mm)