Kino Flo Celeb 200 LED - Manual (Page 3)

3
Celeb 200 Control Panel
A) Kelvin Preset Buttons: Kelvin buttons come preset at the factory.
Factory defaults left to right are: 2700K, 3200K, 4000K, 5000K, 5500K.
User can also use these preset buttons to store custom Kelvin settings.
B) KELVIN / DIM: In KELVIN mode, an amber light appears to the left
of the button and Kelvin is displayed. Press the button again to change
to DIM mode. In DIM mode, a green light will appear to the left of the
button and Dim level is displayed.
C) Display: Provides Kelvin, Dim level and software revision data.
D) LOCK / RESET: In LOCK mode, an amber light is displayed to the
left of the button. In RESET mode, the indicator light is green.
To reset to factory presets, hold the LOCK / RESET button for
5 seconds.
E) On / Off: On = Green light displayed. Off = Amber light displayed.
F) Remote: Input jack for Remote Dimmer (DIM-CE1)
G) Kelvin / Dimmer Knob: Manually adjusts Kelvin or Dim levels.
Press the knob to toggle between fine and coarse adjustments.
A G B C D E F