JK Audio Voice Path - Manual (Page 6)

6
Operation (continued)
With the button in, the handset microphone is discon-
nected and the “Input from PC” cable is active to send
audio signals into the phone and down the line. You can
also use the Record / Playback button to turn off the
handset mic if you are listening to the “Output To PC”
signal over a loudspeaker. This will prevent feedback
between the handset microphone and loudspeaker. Or,
you can always listen over the handset receiver.
To continue using your computer speakers while Voice
Path is connected, use a “Y” adapter on your sound
card line output jack. Connect the Voice Path “To
Phone” cable to one jack on the adapter and your com-
puter speakers to the other. You should then follow
these steps to prevent your telephone conversations
from playing over your speakers:
1. Double click on the volume control (speaker) icon
near the clock on your Windows taskbar.
2. In the microphone section click the box labeled
“Mute”.
This will prevent audio entering the microphone input on
your soundcard from playing back over your computer
speakers. Everything else will function as normal.