JK Audio RemoteMix 3 - Manual (Page 8)

8
Inputs:
Line:
Connector RCA phono Jack
Input Impedance 20 k ohms
Level 250 mV RMS
(-10 dBm nom.)
Microphone: Connector Female XLR
Input Impedance 1000 ohms
Mic / Line: Line = -30dB from microphone gain.
Handset: Modular 4pin/4wire handset jack
Electret microphone bias.
Outputs:
Line: Connector RCA phono Jack
Output Impedance 50 ohms
Level 250 mV RMS
Balanced: Connector Male XLR
Output Impedance 200 ohms
Level 500 mV RMS
(+12 dBm max.)
Headphone: Connector 1/4"stereo jacks
Output Impedance 8 ohms
Power 1/2 watt
Phone Line: Connector RJ11C
Isolation 1500 volts
Ringer (REN) 1.2B
Handset Interface: Switchable electret, dynamic, carbon
handset microphone bias types.
Keypad: DTMF (Dual Tone Multi-Frequency)
Pulse Dialing
Specifications
FAQ’s
? Will your RemoteMix 3 provide phantom power for my condenser
microphone?
! No, our devices will not provide phantom power. If you are connecting
your microphone directly to a JK Audio RemoteMix, you should use a
dynamic mic.