JK Audio RemoteMix 3 - Manual (Page 2)

2
to RJ-11
wall jack
Tape recorder or
audio equipment
input or output,
RCA or XLR
Headphones or small
speaker, 2 jacks 1/4”
stereo or mono
Microphones,
2 XLR jacks
(mic 1 is mic/line
switchable)
Connections
RemoteMix 3 / 3.m is a professional audio mixer designed to work on
any standard analog telephone line or PBX / digital telephone system
via the handset interface. It can also connect to many cellular
telephones using a fax/modem adapter available from your cellular
telephone manufacturer. Simply plug your audio equipment into
RemoteMix 3 / 3.M and connect to a phone line. You can now put on
headphones, plug in a microphone, and you are ready to broadcast
the game or talk up a taped interview.
The RCA type jacks on RemoteMix 3 / 3.m are equivalent to the
jacks found on most home tape recorders, CD players, and receiver/
amplifiers. The balanced XLR output jack provides a high quality
connection to mixers and professional tape gear. This XLR output is
equipped with a switch to select between a telephone line / mic mix
at telephone bandwidth (200 Hz - 3400 - Hz) or a clean mic mix at full
bandwidth (80 Hz - 16 kHz). The clean mic mix contains mic 1, mic 2
and line 3 inputs. The adjustable hybrid circuit provides control over
the mix of transmit and receive audio at the output jacks.