Fcc registration – JK Audio RemoteMix 3 User Manual
Page 10
10
Your new JK Audio product has been registered with the Federal
Communications Commission (FCC). This product complies with the
standards in Part 68 of the FCC rules.
1.
Connection and use with the nationwide telephone
network
The FCC requires that you connect this telephone equipment
to the national telephone network through a USOC RJ-11C
modular telephone jack.
This equipment may not be used with Party Line Service or
Coin Telephone Lines.
This equipment is hearing aid compatible.
2.
Information for the telephone company
Upon request from your local telephone company, you are
required to provide the following information:
a)
The "line" to which you will connect the telephone
equipment (that is, your telephone number), and
b) The telephone equipment's FCC registration number.
This can be found on the bottom of your t e l e p h o n e
equipment,
and,
c) The ringer equivalence number (REN) for this equipment.
The REN is used to determine the quantity of devices
which will be connected to the telephone line. Excessive
RENs on the telephone line may result in the devices not
ringing in response to an incoming call. In most, but not
all areas, the sum of the RENs should not exceed 5.0. To
be certain of the number of devices that may be
connected to the line, as determined by the total R E N s ,
contact the local telephone company.
3. Repair
Instructions
If it is determined that your telephone equipment is
malfunctioning, the FCC requires that it not be used and that it
FCC Registration