JK Audio Interloop - Manual (Page 16)

Disconnecting from a device
with Bluetooth Wireless
Technology
Since Interloop has no other function
when Bluetooth is powered down, you
may simply turn off the Power switch
to disconnect from the Bluetooth
device.
If you wish to leave Interloop powered
up while Bluetooth is powered down,
simply press and hold the Pair button
for 5 seconds.
When a Bluetooth connection is
dropped or terminated, Interloop
returns to Idle Mode. If the unit
is in Idle Mode for >2 minutes
without a connection, Bluetooth will
automatically shut off. You may restart
Bluetooth by either turning the power
switch off and on again, or pressing
the Pair button for 2 seconds.
10
Interloop Wired/Wireless Intercom Belt Pack
Bluetooth Wireless Technology
Connection History
Interloop retains a history of the 16
most recent devices. To clear the
connection history and return to
factory reset, hold the Pair button in
for at least 20 seconds. After resetting,
Interloop will return to Pairing Mode.