JK Audio Interloop - Manual (Page 13)

Bluetoth Wireless Technology
77
Bluetooth Wireless Technology
Pairing Mode
In Pairing Mode, any Bluetooth
wireless technlogy enabled
device within range can pair with
your Interloop. The blue LED will
flash rapidly at a rate of 100ms
off, 100ms on. Once the pairing
process is complete the unique
device ID is stored in Connection
History. Subsequent connections
can be made from Idle Mode.
Idle Mode
When the power switch is turned on,
Interloop starts in Idle Mode.
In Idle Mode, Interloop searches
for paired devices. The blue LED
will flash at a rate of 2 seconds off,
200ms on.
Connected Mode
After bonding is complete, the blue
LED will flash at a slower rate of
2 secs off, 1 second on ( 2 secs
off, 4 secs on for HD Voice). The
connection to that device
is secure. Interloop returns to
Idle Mode when a connection is
dropped or terminated.
Bluetooth Status LED
The blue LED on the front of the unit flashes in different sequences to indicate the
current connection status. When attempting to put the unit into Pairing mode,
you should power the unit off then hold the Pair button as you're turning the
unit on. If you put the unit into the wrong state due to releasing the button at the
wrong time, holding it again for "X" seconds will not put it into the desired mode.