JK Audio innkeeper 4 - Manual (Page 4)

4
Features—Rear View
12. Phone Line Jack - RJ-11 phone line jacks for connection to ana-
log phone lines.
13. Auxiliary Phone Jack - RJ-11 phone jacks for connection to ana-
log telephone(s). Telephone(s) connected will only work with cor-
responding phone line jack. The auxiliary telephone should be
used only for dialing and answering calls.
14. Caller XLR - Balanced line level XLR outputs containing Caller
audio from the corresponding phone line.
15. Send XLR - Balanced line level XLR inputs used to send audio
to the corresponding phone line.
16. Master Send - Balanced line level XLR input may send audio to
any or all of the phone lines based upon controls set within the
menu.
17. Remote Jack - Proprietary 10 pin RJ-50 for connection to a re-
mote terminal interface. The included terminal block features an
Off-Hook signal pin and a Call/Drop control pin for each channel
(See page 8). This jack can also be used for connection to the
optional JK Audio RIU-IP remote interface (see page 16)
18. AC connector - Connect to 120-240 VAC, 50-60 Hz power outlet.
12
13
14
15
16 17 18
17
Operation (continued) Specifications
Inputs:
Line: Balanced Female XLR, 20k ohm,
+10 dBu max
Master Send: Balanced Female XLR, 20k ohm,
+10 dBu max
Outputs:
Line: Balanced Male XLR, 200 ohm,
+14 dBu max
Handset:
Front panel handset jacks biased
for electret handset (not included)
Phone Line: RJ-11C
Aux Phone:
RJ-11C
Isolation:
1500 VAC
Ringer:
0.5B REN
Frequency Response:
Telephone Side 200 Hz - 3600 Hz
Power:
120-240 VAC, 50-60 Hz
Power supply (internal)
Size:
19" x 7.3" x 1.75"
(26.7 x 18.6 x 4.5 cm)
Weight:
7.2 pounds (3.2 kg)
Remote Connector:
RJ-50, 10 pin