JK Audio Daptor Three - Manual (Page 8)

8
?
Why can’t I get the Daptor Three to accept a password
and pair with my new phone?
!
If this is the first time you have bonded to this cell phone, you
might be in Idle Mode instead of Pairing Mode and your Dap-
tor Three is not being recognized. Please check pages 6-7 for
more information about Pairing Modes.
?
What is the range of the Bluetooth transmitter/receiver?
!
Daptor Three will transmit and receive audio signals up to 30
feet (10 meters) from your Bluetooth device. Because trans-
mitting signals over longer distances will require more power,
you should keep Daptor Three as close as possible to your
Bluetooth
device to conserve battery power.
?
Can I pair my Daptor Three to two cell phones and send
my audio to two locations simultaneously?
!
No, your Daptor Three can only be paired to one Bluetooth
enabled device at a time.
?
Can I use my Bluetooth headset with my cell phone while
I have my phone paired to the Daptor Three?
!
No, your cell phone can only be paired to one Bluetooth en-
abled device at a time. In the standard mode of operation,
your cell phone will be paired to our device as if the Daptor
Three were a headset. So you need to use a mic and head-
phones connected to mixer or pre amp which would then be
connected to the Daptor Three.
?
How long will the battery last?
!
Based on our lab tests using a standard alkaline battery with
Daptor Three about 1 meter from your Bluetooth device, the
battery should last for about 18 hours under normal use. As an
indicator of low battery, the blue LED will grow dim and then
extinguish a short while before the battery is completely ex-
hausted and the unit shuts down.
FAQs