JK Audio Daptor Three - Manual (Page 2)

2
Introduction
Daptor Three is a simple, professional audio interface using Blue-
tooth*
Wireless Technology. This device allows balanced and un-
balanced connections to your cell phone. Daptor Three connects
to your cell phone like any other Bluetooth Wireless Technology
enabled headset. It will also connect to any other product, such as
a laptop, that allows wireless headset connections.
With the latest firmware release, Daptor Three can now be set to
function as a Master device, sending stereo audio to other devices
that support the A2DP profile.
There are many profiles that may be used for Bluetooth communi-
cation. Daptor Three is compatible with these three typically used
in cell phones and headsets:
A2DP
(Advanced Audio Distribution Profile)
Headphone mode, used for stereo music
streaming.
30-20 kHz stereo, receive only, headphone mode
30-17 kHz stereo, master mode transmit
Headset
Facilitates mono, full-duplex audio between two
paired devices.
300-3.4 kHz mono, both directions
Hands-Free
Similar to Headset profile but allows the receiving
device more control over the call such as volume,
accept/reject/end a call.
3.4 kHz mono, both directions
Any Questions?
Before you pick up the phone... Please thumb through the rest of
this manual. You might find those deep technical questions are
covered on later pages.
* The Bluetooth word mark and logos are owned by the Blue-
tooth SIG, Inc. and any use of such marks by JK Audio, Inc. is un-
der license. Other trademarks and trade names are those of their
respective owners.