Specifications – JK Audio Daptor Three User Manual
Page 10
10
Inputs:
Female XLR:
Balanced, 20k ohms,
-4 dBu nom.
Stereo Line In:
Unbalanced, 3.5mm,
20k ohm, -10 dBu nom.
Frequency response:
Headset (phone)
300 Hz - 3400 Hz
Headphone mode:
A2DP
30 Hz - 17k Hz
Outputs:
Male XLR:
Balanced, 200 ohms,
0 dBu max.
Stereo Line Out:
Unbalanced, 3.5mm,
200 ohms, -6 dBu max.
Frequency response:
Headset (phone)
300 Hz - 3400 Hz
Headphone mode:
30 Hz - 20k Hz
Power:
One 9-volt battery
Size: 4.4” x 2.7” x 1.2”
(11.2 x 6.9 x 3.5 cm)
Weight:
7 ounces (200 grams)
Note: While Daptor Three was designed to be very rugged and
durable, it is not waterproof and care should be taken to keep the
unit dry.
Specifications
See also other documents in the category JK Audio Accessories communication:
- AutoHybrid - Telephone Audio Interface (16 pages)
- BlueDriver-F3 (24 pages)
- BlueDriver-M3 (24 pages)
- BlueKeeper (12 pages)
- BlueKeeper (24 pages)
- BluePack (24 pages)
- BlueSet (20 pages)
- Broadcast Host (20 pages)
- BSET-HS1 (11 pages)
- CellTap (8 pages)
- CellTap (4 pages)
- ComPack (8 pages)
- ComPack (16 pages)
- Concierge 2x6 (11 pages)
- Concierge 2x6 (10 pages)
- Daptor One (8 pages)
- Daptor One (4 pages)
- Daptor Two (4 pages)
- Daptor Two (8 pages)
- Daptor Three (6 pages)
- Four IFB (10 pages)
- Four IFB (20 pages)
- Guest Module 1 (5 pages)
- Inline Patch (6 pages)
- innkeeper 1x/rx (8 pages)
- innkeeper 1x/rx (16 pages)
- innkeeper 2 (20 pages)
- innkeeper 2 (10 pages)
- innkeeper LTD (10 pages)
- innkeeper LTD (20 pages)
- innkeeper PBX (20 pages)
- Interchange (16 pages)
- Interloop (24 pages)
- Outerloop (24 pages)
- PBXport (8 pages)
- PBXport (16 pages)
- Pureformer (2 pages)
- Pureformer (4 pages)
- QuickTap (4 pages)
- QuickTap (8 pages)
- QuickTap IFB (4 pages)
- QuickTap IFB (8 pages)
- RemoteAmp (2 pages)
- RemoteAmp (4 pages)