JK Audio BSET-HS1 - Manual (Page 4)

3 2
BSET-HS1 Wireless Headset Getting Started
Controls & Indicators Getting Started
Headset Controls
Answer Button (Multi Function Button)
Volume Down
Volume Up
lED Status Indicator (Red/Green)
USB Port
Mute Button
Microphone
Adjusting the Fit
Adjust the headband to a comfortable
fit by sliding the headband up or down.
There is a leatherette ear cushion and
a foam ear cushion supplied with the
headset.
Charging Your Headset
when it's necessary to charge your
headset, the lED Status Indicator will
flash red. Also, a two-tone melody
repeats every 30 seconds in the
earpiece. Once a low battery level is
indicated, there are approximately 2-3
minutes of battery life remaining.
To charge your headset, plug the
universal AC charger into the USB
port on the bottom of the headset.
while charging, the lED will remain
lit solid red. normal charging time is
3-4 hours. If the headset has been out
of use for an extended period, it may
take up to 5 hours to fully charge it.
Note: a universal AC charger is included.
Turn on the headset
Press and HOlD the Answer Button
for 2 seconds. Release when the lED
flashes green, a short melody will play
in the earpiece.
Turn off the headset
Press and HOlD the Answer Button
for 4 seconds. Release when the lED
flashes red 3 times, another short
melody will play in the earpiece.