JK Audio BluePack - Manual (Page 12)

6
BluePack Wireless Interview Tool
Bluetooth Wireless Technology
Pairing Mode
In Pairing Mode, any Bluetooth
wireless technlogy enabled device
within range can pair with your
BluePack. To put the unit in Pairing
Mode, press the blue for 6
seconds while the unit is on. The
blue LED will flash rapidly at a rate
of 100ms off, 100ms on. Once
the pairing process is complete
the unique device ID is stored in
Connection History. Subsequent
connections can be made
automatically from Idle Mode.
Bluetooth Status LED
The blue LED on the front of the unit flashes in different sequences to indicate
the current connection status. When attempting to put the unit into Idle or
Pairing mode, you should power the unit off then back on before pressing
the . If you put the unit into the wrong state due to releasing the
at the wrong time, holding the for "X" seconds will not put it into the
desired mode.
Idle Mode
In Idle Mode, BluePack searches for
paired devices. To put the unit in Idle
Mode, press the blue for 4
secs when the unit is on. The blue
LED will flash at a rate of 2 secs off,
200ms on.
Connected Mode
After bonding is complete, the blue
LED will flash at a slower rate of
2 secs off, 1 sec on (2 secs off,
4 secs on for HD Voice). The
connection to that device is secure.