JK Audio BlueDriver-F3 - Manual (Page 19)

15
FAQs
FAQ's
Why won't BlueDriver connect
to my device?
Ideally, the master device will
search for the headset device. If the
BlueDriver isn't pairing with your
device, try turning the second device
on first from your initial attempt to
connect.
Why doesn’t the BlueDriver-F3
change connections when I
move the switch from Headset
to Phone?
If you change this switch while the
unit is on, you will need to power the
unit off (see page 7), then power the
unit back on before the change takes
effect.
How long does it take to
recharge the battery?
BlueDriver-F3 can fully charge
the internal battery in about 2 1/2
hours. These batteries do not have
a “charging memory” and they can
be recharged at any time without
changing their life expectancy.
How do I replace the battery in
this unit?
This is not a user replaceable battery.
Please contact JK Audio or a factory
authorized service center for battery
replacement.
Will BlueDriver-F3 work with
my condenser mic?
BlueDriver-F3 does not provide
phantom power to condenser
microphones.