Setting the time, 4 setting the time – HF scientific 19944 Triple Validation Turbidimeter - 0-100 NTU User Manual

Page 23

TVT2 (5/02)
Rev. 1.7 (.pdf)

Select the correct day by pressing the

t or u buttons to change the displayed day.

When you have selected the proper day, press the

↵ button.

8.4 Setting the Time
After pressing the

↵ button, the TIME block will be displayed and you will see the time

displayed on the upper LCD screen in 24-hour format. The number flashing corresponds
to the hour.

Select the correct hour by pressing the

t or u button to change the displayed hour.

When you have selected the proper hour, press the

↵ button. After pressing the ↵ button,

the second number on the upper LCD screen will start to flash: this number corresponds
to minutes.

Select the correct minutes level by pressing the

t or u button to change the displayed

minutes. When you have selected the proper minute’s level, press the

↵ button.

This manual is related to the following products: