F4 f2 f3 – HF scientific Micro200BW Turbidimeter - 0-100 NTU User Manual

Page 25

MICRO 200 BW 0-10 & 0-100 NTU (05/05)
Rev. 3.4

Page 13

3.2.1 Turbidity Display

This is the turbidity display. The display shown above is fairly typical. The display has the following parameters:

1 -

CURRENT TURBIDITY READING: 0.4775 NTU

2 -

GRAPH TIME BASE: 24 HOURS

3 -

GRAPH UPPER LIMIT: 0.60 NTU

4 -

GRAPH LOWER LIMIT: 0.40 NTU

5 -

ALARM 1 SETTING: ALARM ON HIGHER THAN 0.55 NTU

6 -

ALARM 2 SETTING: ALARM ON LOWER THAN 0.10 NTU

7 -

TIME: 10:00 AM (SHOWN IN 24 HOUR CLOCK MODE)

8 -

DATE: MAR 04

9 -

GRAPH OF TURBIDITY HISTORY

Menu

................................................

- - - - - - - - - - - - - - -

- - - - - - - - - - - - - -

- - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - - - - - -

.......................
.................

............

Menu

To leave the turbidity display and get to the Main Menu push . F1 - F4 are nonfunctional in this display.
Please note that the graph history shows the average reading taken within the sample period.

This manual is related to the following products:

Micro200BW Turbidimeter - 0-10 NTU