HCO NT - Manual (Page 2)

VIDEO SOUND (only displayed if VIDEO mode is selected above)
Video sound recording can be turned ON or OFF. Highlight
“VIDEO SOUND” and push OK or right arrow button. Select ON or
OFF and push OK to SAVE. (Sound recording may be illegal to
publish with human activity in some jurisdictions.)
QUIET TIME
This feature puts the camera to sleep for the selected period of
time before it can be re-activated by motion. Times include 5s,
10s, 20s, 30s, 1min, 5min, 10min, 30min, 60min. Highlight
“QUIET TIME” and push OK or right arrow button. Select desired
‘quiet time’ push OK to SAVE.
ILLUMINATION
This feature controls the number of IR light output during night
photos and video. Highlight “ILLUMINATION” and push OK or
right arrow button. Select desired ‘illumination’ mode and push
OK to SAVE. This setting is only available on NT50.
TEMPERATURE
Allows user to select either Fahrenheit or Celsius temperature
settings. Highlight “TEMPERATURE” and push OK or right arrow
button. Select Fahrenheit or Celsius and push OK to SAVE.
DATE / TIME STAMP
This allows user to have the date, time, and temperature
stamped onto each photo or video. Highlight “Date / Time
Stamp” and push OK or right arrow button. Select ON or OFF and
push OK to SAVE.
SCREEN BRIGHTNESS
This setting adjusts the brightness of the remote
controller/viewer. Highlight “Screen Brightness” and push OK or
right arrow button. Push UP or DOWN arrow to select desired
brightness and push OK to SAVE.
SET DATE / TIME
This feature allows the user to set the display format of date /
time and set the current date and time. Highlight “Set Date /
Time” and push OK or right arrow button. Select one of three
menu options below:
DATE FORMAT: Select the desired Date Format and push OK to
SAVE.
TIME FORMAT: Select desired Time Format and push OK to SAVE
SET DATE / TIME: Set using UP, DOWN, RIGHT, and LEFT arrow
and push OK to SAVE.
Push MENU button to return to menu
SET DUTY TIME
This feature allows the user to program the camera to turn ON
and OFF at a specified time. Highlight “Set Duty Time” and push
OK or right arrow button.
SET START TIME: Set camera START time using ARROWS and push
OK to SAVE.
SET STOP TIME: Set camera STOP time using ARROWS and push
OK to SAVE.
Push MENU button to return to menu
ACCESS CONTROL
This feature allows the user to set a 4-digit password to deter
theft and render the camera unusable without the password.
Highlight “Access Control” and push OK or right arrow button.
SET PASSWORD: Select desired password using ARROWS and
push OK to SAVE.
DISABLE PASSWORD: Select and push OK to disable password.
BATTERY TYPE
This camera is a precisely tuned instrument. It is recommended
to use high quality alkaline or NiMH batteries. Programming
which batteries are present will maximize the cameras potential.
Highlight “Battery Type” and push OK or right arrow button.
Select ALKALINE or Ni-MH batteries and push OK to save setting.
FORMATTING SD CARD
Formatting the SD card removes all files on the memory card and
prepares it for use in the camera. Highlight “Format SD Card” and
push OK or right arrow button. Select YES to format SD card and
push OK to proceed with formatting SD card.
CAMERA INFORMATION
Highlight “Camera Information” and push OK or right arrow
button for the following information: FILES COUNT, STORAGE
and FIRMWARE VERSION
TRANSFERING PICTURES AND VIDEO TO A COMPUTER:
Pictures and video can be removed in one of two ways:
- SD memory card can be removed from camera (ALWAYS ensure
camera is OFF before removing SD card) and transferred to
another computer or SD card reader.
- Connect camera to computer using supplied USB cable. Connect
camera to computer with USB cable. Turn camera ON. Computer
will recognize camera and prompt you to open file or save
pictures
Package Contents:
•
Camera
•
Remote controller/viewer
•
Remote to Camera Cable
•
USB cable
•
Video cable
•
Nylon mounting strap