HCO VH400HD User Manual

Page 10

Page | 9

Select TRIGGER MODE

Select Electricity or Normal mode

ILLUMINATION
This feature allows the user to use external lighting (XtendIR-B)
or turn off IR lights if no lights are required in the night. User
selects Internal when they want the IR lights of camera to work
normally; select External if connecting XtendIR-B (sold
separately) to the camera OR to turn lights OFF at night, and
Int + Ext if both the XtendIR-B and camera IR lights are desired.
NOTE: Night image will be black if External is selected without
XtendIR.

1. Select ILLUMINATION
2. Select Internal, External, or Internal + External and

push OK to set

PIR SENSITIVITY
This feature adjusts the PIR motion sensor. Normal will be
used in most settings. If too many false images are occurring,
user can select Low and adjust camera angle and
surroundings. User can select High to increase sensitivity.

Select PIR SENSITIVITY

Select High, Normal, or Low

DUTY TIME
This feature allows the user to program the camera to turn ON
and OFF at a specified time.

Select DUTY TIME

Select Enable to turn ON or Disable to turn OFF

SET START TIME

Set camera START time using arrows and push
OK to set

SET STOP TIME