HCO MB500 - Manual (Page 21)

Page | 20
IV. CAMERA INFORMATION
Select CAMERA INFORMATION from main menu
FILES COUNT
Displays PICTURE and VIDEO number
STORAGE
Displays SD memory card USED SPACE and FREE SPACE
FIRMWARE VERSION
Displays the current camera firmware version
CAMERA NAME
Allows you to display a name on the photo. From left to right the icons are as
follows: numbers, letters and symbols, save, backspace, back to menu arrow.
1.
Select ENABLE to set up name
2. Create your personalized name using arrows
3. Push SAVE icon when finished
4. Push LEFT arrow button to return to menu
ADDITIONAL INFORMATION
TRANSFERRING PICTURES AND VIDEO TO A COMPUTER:
Pictures and video can be removed in one of two ways:
1. SD memory card can be removed (ALWAYS ensure camera is OFF before
removing) and transferred to computer or SD card reader.
2. Connect camera to computer using USB cable.
i. Turn camera ON (may not be required)
ii. Computer will recognize camera and prompt you to open file or save pictures
FIRMWARE UPDATES
This camera is designed to accommodate future firmware updates if required.
1. Copy the firmware update file (eg. Main.elf and SPEC.bin) onto the SD card root
directory (do not place in any file)
2. Insert SD card into the camera
3. Push and hold UP arrow while turning camera to SETUP mode
4. The blue LED on camera front will blink until the update is finished.