Bahco Saw - Manual (Page 16)

Production Cutting
▼ ▼
LARGE &
MEDIUM SOLIDS
SMALL SOLIDS
& BUNDLES
PIPES, PROFILES,
CASTINGS
CONTOURS
▼ ▼
14
3854 – SANDFLEX ® King Cobra ® PHG ™
For high productivity cutting of difficult-to-cut materials
• Special design in combination with sharp cutting edges for easy
penetration in difficult to cut materials.
• Harder teeth for longer wear.
• Precise set for smooth surface finish.
• Ground tooth gives precise and consistent tooth height for
consistent chipload.
• Fatigue resisting backing material and M42 tooth tips offer the
best performance and long life in difficult to cut materials.
DIMENSIONS TEETH TOOTH PRODUCT
MM INCHES PER INCH TYPE CODE
27 x 0.9 1 x .035 2/3 Combo PHG 3854-27-0.9-PHG-2/3
3/4 Combo PHG 3854-27-0.9-PHG-3/4
4/6 Combo PHG 3854-27-0.9-PHG-4/6
34 x 1.1 1-1/4 x .042 2/3 Combo PHG 3854-34-1.1-PHG-2/3
3/4 Combo PHG 3854-34-1.1-PHG-3/4
4/6 Combo PHG 3854-34-1.1-PHG-4/6
41 x 1.3 1-1/2 x .050 1.4/2 Combo PHG 3854-41-1.3-PHG-1.4/2
2/3 Combo PHG 3854-41-1.3-PHG-2/3
3/4 Combo PHG 3854-41-1.3-PHG-3/4
4/6 Combo PHG 3854-41-1.3-PHG-4/6
54 x 1.6 2 x .062 .7/1 Combo PHG 3854-54-1.6-PHG-.7/1
1/1.4 Combo PHG 3854-54-1.6-PHG-1/1.4
1.4/2 Combo PHG 3854-54-1.6-PHG-1.4/2
2/3 Combo PHG 3854-54-1.6-PHG-2/3
3/4 Combo PHG 3854-54-1.6-PHG-3/4
67 x 1.6 2-5/8 x .062 .7/1 Combo PHG 3854-67-1.6-PHG-.7/1
1/1.4 Combo PHG 3854-67-1.6-PHG-1/1.4
1.4/2 Combo PHG 3854-67-1.6-PHG-1.4/2
2/3 Combo PHG 3854-67-1.6-PHG-2/3
▼
Product code: How it works
SAMPLE CODE SAMPLE EXPLANATION
3854 -27-0.9-PHG-2/3-4570
3854- 27 -0.9-PHG-3/4-4570
3854-27- 0.9 -PHG-4/6-4570
3854-34-1.1- PHG -2/3-4570
3854-34-1.1-PHG- 3/4 -4570
3854-34-1.1-PHG-4/6- 4570
GRADE: 3854 Sandflex King Cobra PSG
WIDTH: 27 mm, 1 inch
THICKNESS: 0.9 mm, .035 inch
TOOTH SHAPE: Positive (no letter for Combo)
TEETH PER INCH: 3/4
LOOP LENGTH: 4570 mm, 15’-0"