Gossen Sixtomat flash - Manual (Page 15)

GOSSEN Foto- und Lichtmeßtechnik GmbH 15
3.4 Setting and measuring correction values
(see Section 3.4.4 Important remarks con-
cerning correction values, page 17)
3.4.1 Setting correction values
– Select with the function buttons (the last
valid correction value appears on the display)
– Enter or change the correction value with the
value buttons
The extension factor is shown in the right-hand
digital display, and the correction value in stops
in the left-hand section.
Enter in 1/10th stops (small figure) within a range
of ±7.9 exposure value stops.
A figure preceded by „–“ indicates an exposure
extending correction.
Example:
–3.1 stops equal factor 8.6.
In the event of an exposure shortening correc-
tion, only the left-hand display appears as an ex-
posure value difference in stops.
COR