Glyph DVD Duper1 - Manual (Page 45)

41
AEC-7763LC/LD & ARS-2022/2022D
5.12 Adv Setup
On the above figure press ESC to return to Function 11. Then, press ESC for 2
seconds to enter Function 12-01 as the following figure shows.
Function 12 Adv Setup lets you change the system configuration. This function
includes 12 parts. They are UnderRun Protect, Overburn, Read Error Skip, Format
HDD, Verify HDD, Burn-in, Update Firmware, Compare Firmware, H/W Diagnostic,
Load Default, CD+G, and ISRC.
5.12.1 UnderRun Protect
On the above figure if you press ESC, you can enter Function 12 as the following
figure shows.
When erasing finishes, LCD will show the results as follows.
Full Erase
OK:01 Fail:00
12-01. Adv Setup
UnderRun Protect
12. Adv Setup