Glyph DVD Duper1 - Manual (Page 11)

7
AEC-7763LC/LD & ARS-2022/2022D
When copying is in progress, MB and time will decrease whereas the percentage of
completion will increase.
Chapter 5 Functions
There are 12 functions: Copy, Test, Test & Copy, Verify, Compare, Prescan, Disc
Info, Select Source, Image, Edit Track, Setup and Advanced Setup. Among the 12
functions, Edit Track is designed exclusively for editing a collection of favorite songs
from CDs. During operation if you do not understand an LCD message, you can see
Appendix 2.
5.1 Copy
Function 1 Copy is to copy data from a source DVD directly into a blank DVD disk.
Before copying be sure that the source DVD is placed onto DVD-ROM, or there are
data in a certain partition if you have installed a hard drive. If you are not so sure of
real copying, you can use Function 2 Test to simulate first.
Select function 1. Put a source DVD onto DVD-ROM and a blank DVD disk onto the
DVD writer. A DVD rewriteable disk containing old data is usable, too.
After the DVD-ROM and DVD writer detect DVDs, press ENT to start copying. LCD
will show the copying information as follows.
1.Copy
Copying- DVD 0%
4213.4MB 15:00