Behringer EUROPOWER EP2500 - Manual (Page 12)

EUROPOWER EP1500/EP2500
Specifications 12
Specifications 5.
EP1500 EP2500
Output Power
20 Hz - 20 kHz @ 0.1% THD, both channels driven
8 Ω per channel
260 W 450 W
4 Ω per channel 400 W 650 W
1 kHz @ 0.1% THD, both channels driven
8 Ω per channel
280 W 500 W
4 Ω per channel 450 W 750 W
2 Ω per channel 700 W 1200 W
Bridged Mono
8 Ω, 20 Hz - 20 kHz, 0.1% THD
800 W 1300 W
8 Ω, 1 kHz, 0.1% THD 900 W 1500 W
4 Ω, 1 kHz, 1% THD 1400 W 2400 W
Distortion
< 0.01% < 0.02%
Frequency Response
at 10 dB below rated output power
20 Hz - 20 kHz, +0/-1 dB
at -3 dB points 5 Hz - 50 kHz
Damping Factor
> 300 @ 8 Ω
Noise
unweighted, 20 Hz to 20 kHz
-100 dB
Voltage gain
40x (32 dB) 50x (34 dB)
Input sensitivity
V RMS (@ 8 Ω)
1.15 V (+3.4 dBu) 1.23 V (+4.0 dBu)
Input impedance
10 kΩ unbalanced, 20 kΩ balanced
Controls
Front
Power switch, gain control (channels 1 and 2)
Rear DIP switches (10x)
Indicators
POWER
green LED
CLIP red LED, 1 per channel
SIGNAL yellow LED, 1 per channel
Connectors
Inputs
Balanced XLR and 1/4" TRS connectors
Outputs Touch-Proof binding posts and NEUTRIK SPEAKON
Cooling
Continuously variable speed fan, back-to-front air flow
Amplifier protection
Full short circuit, open circuit, thermal and HF protection
Stable into reactive or mismatched loads
Load protection
Turn-on/off muting, AC coupling
Output circuit type
Class AB complementary linear
output
Class H complementary linear
output
Power supply
Mains voltage/Breaker
100 - 120 V~, 50/60 Hz
15 A
220 - 230 V~, 50/60 Hz 8 A
Power consumption 1600 W 2600 W
Mains connector Standard IEC receptacle
Dimensions/weight
Dimensions (H x W x D)
approx. 88 x 482.6 x 402 mm
approx. 3 1/2" x 19" x 15 4/5"
Weight
approx. 15.7 kg
approx. 34.6 Ibs
approx. 16.6 kg
approx. 36.6 lbs
BEHRINGER makes every effort to ensure the highest standard of quality. Necessary modifications are carried out without notice. Thus, the specifications and design of the device
may differ from the information given in this manual.