BenQ S700 - Manual (Page 158)

142 Menus
Stopwatch
1. Press to start the stopwatch.
2. While the stopwatch is running, you can press (Record) to save
up nine elapsed times (such as in a race).
Pressing (Back) or while the stopwatch is running will stop
and reset the stopwatch, and then take you back to the Tools menu.
3. Press to halt the stopwatch.
4. Once the stopwatch is halted, you can press to move the cursor to
the elapsed time you want to check. Additionally, after the watch stops
running, you can compare the differences of the other elapsed times
against a particular elapsed time which is used as the comparison base.
To do so, use to move the cursor to the lap time you want to use as
the base, and then press (Comp) to list the time differences against
the base.
5. To resume the stopwatch, press .
6. Press (Reset) to zero the stopwatch.
Countdown Timer
1. Press (Set) to enter the amount of time to count down. You can
set any time up to 59 minutes and 59 seconds.
2. Press and the timer starts counting down to zero. You can then
use the timer in the same way with the stopwatch.