GBC 640T Laminator - Manual (Page 19)

Page 5-7
640t – Installation and Operating Instructions
c
ontrol
p
anel
Fig. 5-13. Control Panel.
A. Ready Indicator
The Ready Indicator informs the operator that the
machine has reached the desired set temp of the Top
Main Roller.
B. Temperature Display
The Temperature Display shows the Set Temperature
of the laminator.
C. Speed Display
The Speed Display shows the set speed of the
laminator.
A
B
C
D
E
F
G
H
I
J
K
L
M
t
emp
s
ection
D. MES (Measure)
Press MES to show the actual Top Main
Roller Temperature.
E. Temp Arrow Up
To increase the Top Main Roller temperature,
press and hold.
F. Temp Arrow Down
To decrease the Top Main Roller temperature,
press and hold.
G. HOT
For the factory preset temperature of the Top
Main Roller, press
HOT.
H. COLD
For the factory preset temperature of the Top
Main Roller, press
COLD
s
peed
s
ection
I. Speed Arrow Up Symbol
To increase the Roller speed, press and hold.
J. Speed Arrow Down Symbol
To Decrease the Roller speed, press and hold.
K. RUN
Press and release RUN for continuous running.
L. STOP
Press STOP to stop the machine.
M. REV (Reverse)
Press and hold REV to reverse the direction of the
rollers. Release REV to stop. When in the reverse
mode, the machine will operate at 3 fpm, (0.9mpm)