GBC MS5 - Manual (Page 5)

5
F.300-B/MS-5 DRILL/JULY 2000
SPECIFICATIONS
Drilling
Number of Drill Heads
2 to 5
Drill Bit Sizes Available 1 /
8
” to 1 /
2
” (3 mm to 13 mm)
Center To Center Maximum 15” (38 cm)
Minimum Center Distance Between Heads 1 7 /
8
” (8.7 cm)
Maximum Drilling Capacity (Pile Height) 2 1 /
2
” (63 mm)
Strokes per Minute (Adjustable) Up to 18
Backgage Adjustment 0 to 5” (0 to 13 cm)
Vertical Adjustment of Individual Heads 1 /
4
” (6mm)
Dimensions
Table
17 3 /
4
” x 34” (45 cm x 86.4 cm)
Table Height 37” (94 cm)
Overall Height 56” (142 cm)
Floor Space Needed 36” x 36” (92 cm x 92 cm)
Net Weight (Approximate) 830 lbs (373.5 kg)
Shipping Weight (Approximate) 1000 lbs (453.6 kg)
Electrical
208/230 Volts (±10%)/18 Amps, 1 Phase, 60 Hz, AC. Service size 30 Amps.
Pump:
1 /
2
H.P. Spindle: 1 1 /
2
H.P.
Optional Motor: 208/230 Volts (±10%)/10 Amps, 3 Phase, AC. Service size 20 Amps.
460 Volts (±10%)/5 Amps, 3 Phase, AC. Service size 15 Amps.
Sound Emission
A-weighted sound pressure level measured in an enclosed room at 6 feet (183 cm)
above floor:
Machine running: Less than 70 dB
Machine drilling paper: 71 dB
Challenge reserves the right to make changes to any product or specification without notice and without
incurring responsibility to existing units.
PACKING LIST
Part No. Description Qty.
Basic Machine .................................................................... 1
W-105-1 Allen Wrench, 1 /
4
” ‘T’ Handle ............................................... 1
A-6588 Wrench, ‘T’ Handle Drill Drift ............................................... 1
4688 Lubrication Stick, Drill Ease ................................................. 1
A-4950 Drill Sharpener, Hand .......................................................... 1
6564 Drill Block ........................................................................... 3
45067 Backgage Filler Block Asm. (magnetic) ............................... 2
45163 Spring - Drill Block .............................................................. 1
8278-1 Knob ................................................................................... 2
Drill Head(s)-as ordered Includes as Standard (per head)
CD-4-2 1 /
2
1 /
4
” (64mm) Hollow Drill ....................................................... 1
K-85 Drift Hole Cover .................................................................. 1